Valon 3008 universal frequency divider and clock source
Now your divider can also be a clock source. You can still select any of the division ratios on any of the three outputs. For example, install a 120MHz TCXO and get 120MHz (N=1) on output 1, 40MHz (N=3) on output 2, and 10MHz (N=12) on the CMOS output 3. Very convenient.
Most frequency divider modules available today are way too expensive and have only one or two division ratios available. We found that the available modules would probably be difficult to use since they mostly come in aluminum boxes and weird TNC or Type-N connectors.
That is why we came up with the 3008. It's an ideal companion divider to the 5007, 5008, or 5009 synthesizer when you need to extend the low-frequency range of operation below all the way down to 5MHz. Attention to careful circuit design and layout assures the low additive jitter, phase-noise, and spectral purity. It can be used with any RF or digital input source to provide a wide range of frequencies and divider options.
Applications include:
Small sized module, SMA connectors. 5Volt dc at 100mA.
Accepts TCXO sizes 9mm x 14mm, 5mm x 7mm, and 5mm x 3.2mm, 3.3V.
Includes 20” dc supply cable and six 2mm jumpers.
3008 Data Sheet
Most frequency divider modules available today are way too expensive and have only one or two division ratios available. We found that the available modules would probably be difficult to use since they mostly come in aluminum boxes and weird TNC or Type-N connectors.
That is why we came up with the 3008. It's an ideal companion divider to the 5007, 5008, or 5009 synthesizer when you need to extend the low-frequency range of operation below all the way down to 5MHz. Attention to careful circuit design and layout assures the low additive jitter, phase-noise, and spectral purity. It can be used with any RF or digital input source to provide a wide range of frequencies and divider options.
- Input range 5-1600MHz (usable to 2000MHz).
- Two 50Ω RF outputs and one CMOS compatible 3.3VTTL output.
- All three dividers are completely independent, any division ratio on any divider output.
- User programmable with convenient hardware jumpers.
- Division ratios available: 1, 2, 3, 4, 5, 6, 8, 9, 10, 12, 15, 16, 18, 24, 30, 32.
- 50% duty cycle output on all even divisions.
- Extremely low added jitter.
- Low input sensitivity.
Applications include:
- Extending the frequency range of the 5007/5008/5009 down to 5MHz.
- Reference dividers, divide the 1GHz output of your ruby maser to get a 10MHz reference.
- Pre-scaler for any source.
- Install a TCXO and create a multiple output reference clock.
Small sized module, SMA connectors. 5Volt dc at 100mA.
Accepts TCXO sizes 9mm x 14mm, 5mm x 7mm, and 5mm x 3.2mm, 3.3V.
Includes 20” dc supply cable and six 2mm jumpers.
3008 Data Sheet